WIP – 2010 – Great Mazinger’s Brain CondorWIP – 2010 – Grande Mazzinga Brain Condor


This is wip on the Brain Condor Great Mazinger , scale unknown.
For convenience (especially because I have to redo the pilot , Tetsuya Tsurugi !) I opted for a 1/48 scale , which still seems quite suitable .
Being a very old model , and particularly those with the spring wheels, I had to start taking drastic decisions for the many changes to make .
I removed the lower part which housed precisely the spring mechanism , closing all with plasticard and Bondo putty .

After buying a box of pilots in 1/48 scale , I started to remove all the surface parts of the pilot, and then tried to reconstruct the suit of Tetsuya . Of course the result is not great , but I can use it.
I still have to work a little bit on the helmet …
The cockpit is fully reconstructed in plasticard . I must admit that it is a bit tight for the pilot, but space is limited by the structure of the model …
I then moved on to detail the tools . Design is not just what we see in the cartoon, let’s say that I have made ​​it a little more ” real ” …
On the fuselage of the Condor I carved paneling , which I think make it more “bad” …

I wanted to try the technique described and used by the NKGC forum user Wittmann68 , giving a coat of primer on the model, followed by overlapping strokes of black, silver and white to get deep into the phase of aging and peeling.
Next step will be drafting a coat of silver and red color.
After a coat of Tamiya gloss black , I used Alclad for the first time , and I have to admit that they are great …

Then colored with the Tamiya transparent red , on the whole model .
After a night of drying , I masked with masking paper all the parts that had to be yellow . I then restored a coat of Alclad and Tamiya clear yellow .
Now all that remains is the central black stripe , a bit of weathering and voila ! ! The Brain Condor is OVER !

Finally I see approaching the end of this project !
After making chipping on the paint , I gave some coats of Tamiya transparent Smoke in some parts of the Brain Condor , such as reactors and front placket .
I then made ​​a couple of washes with brown oil .
Last modify before the matte transparent . As suggested by some forum users NKGC I modified the rear reactors .
Now I look much better …

I started then the base of the diorama , set in the sea. The Brain Condor is puttied and ready for color phase …

After fixing the base with frame and side walls , I put hand to the waves of the sea. I took a piece of wooden wall where the sea sinks to the force of the air produced by the passage of the “Condor” (of course after masked the base) .

Are then passed to the coloring step , starting from a Flat Blue Tamiya added a few drops of Flat Green. I then added more green to spend the crests of the waves. Eventually, with the soiled white green I rehearsed again the upper part of the waves.

With the same color , the more diluted and low pressure I did something similar to the ” Mottling ” , a technique that I discovered thanks to my friend Medorik (his Predator are spectacular ) from the forum NKGCommunity, and I started to make a lot of circles on the surface water , to simulate a bit of depth …
In the end I paint with a coat of Clear Blue to homogenize the whole …
The result seems quite convincing , bearing in mind that I have yet to create the water itself.

Inspired by an episode of the second series of Plamo Tsukurou I decided to try my hand at recreating the water. After painting the base with a blue green , I started to apply transparent silicone (to the one used to seal the windows).
The effect that is created is quite truthful …

Questo wip è sul Brain Condor del Grande Mazinga, in scala ignota.
Per comodità (soprattutto perchè devo rifare il pilota, Tetsuya Tsurugi!!) ho optato per una scala 1/48, che comunque mi pare abbastanza adatta.
Essendo un modello molto vecchio, e soprattutto di quelli con le rotelle a molla, ho dovuto iniziare prendendo drastiche decisioni per le molte modifiche da fare.
Ho tolto via la parte inferiore che ospitava appunto il meccanismo a molla, richiudendo il tutto con plasticard e stucco Bondo.

Dopo aver comprato una scatola di piloti in scala 1/48, ho iniziato a togliere tutti i particolari da un pilota, cercando poi di ricostruire la tuta del nostro Tetsuya. Naturalmente il risultato non è eccezionale, ma a me può bastare.
Devo ancora lavorare un pò sul casco…
Il cockpit è interamente ricostruito in plasticard. Devo ammettere che è un pò stretto per il pilota, ma lo spazio è limitato dalla struttura del modello…
SOno poi passato a dettagliare gli strumenti. Il design non è proprio quello del cartone animato, diciamo che l’ho reso un pò più “reale”…
Sulla carlinga del Condor ho inciso delle pannellature, che secondo me lo rendono più “cattivo”…

Ho voluto provare la tecnica descritta e utilizzata dall’altro forumista Wittmann68, dando una mano di Primer sul modello, seguita da passate sovrapposte di nero, silver e bianco per avere profondità nella fase di invecchiamento e scrostatura.
Prossima fase sarà la stesura una mano di silver e di rosso trasparente.
Dopo una mano di nero lucido Tamiya, ho usato per la prima volta gli Alclad, e devo ammettere che hanno una resa eccezionale…

Sono poi passato al rosso trasparente Tamiya, dato su tutto il modello.
Dopo una notte di asciugatura, ho mascherato con nastro carta tutte le parti che dovevano essere gialle. Ho poi ridato una mano di Alclad e il giallo trasparente Tamiya.
Ora non rimane che la striscia nera centrale, un pò di weathering et voila!!!! Il Brain Condor è FINITO!!!
Finalmente vedo avvicinarsi la fine di questo progetto!!
Dopo aver effettuato delle scrostature sulla vernice, ho dato delle passate di Smoke tamiya trasparente in alcuni punti del Brain Condor, come i reattori e i cannoncini frontali.
Ho poi fatto un paio di lavaggi con marrone ad olio. Scusate se alcune immagini sono sfocate, ma stasera la macchina fotografica fa un pò di bizze…
Ultima modifica prima del passaggio del trasparente opaco.
Come suggerito da alcuni utenti del forum NKGC ho modificato i reattori posteriori.
Ora mi sembrano molto meglio…

Ho iniziato poi la base del diorama, ambientato in mare. Il Brain Condor è stuccato e pronto per la fase colore…

Dopo aver sistemato la basetta con cornice e pareti laterali, ho rimesso mano alle onde del mare, aggiungendone e facendo meglio il tutto. Ho tolto una parte di parete di legno dove il mare sprofonda per la forza dell’aria prodotta dal passaggio del “Condor” (naturalmente dopo aver mascherato per bene la basetta).

Sono poi passato alla fase di colorazione, partendo da un Flat Blue Tamiya con aggiunta qualche goccia di Flat Green. Ho poi aggiunto altro verde per passare le creste delle onde. Alla fine, con del bianco sporcato di verde ho ripassato di nuovo la parte superiore delle onde.

Con lo stesso colore, più diluito e a bassa pressione ho fatto una cosa simile al “Mottling”, tecnica che ho scoperto grazie all’amico Medorik (i suoi Predator sono spettacolari) del forum della NKGCommunity, ed ho iniziato a fare tanti cerchi sul pelo dell’acqua, per simulare un pò di profondità…
Alla fine ho passato una mano di Clear Blue per omogeneizzare il tutto…
Il risultato mi pare abbastanza convincente, tenendo presente che devo ancora creare l’acqua vera e propria.

Prendendo spunto da una puntata della seconda serie dei Plamo Tsukurou ho deciso di cimentarmi con il ricreare l’acqua. Dopo aver dipinto la basetta con un blu verde, ho iniziato ad applicare del silicone trasparente di quello usato per sigillare i vetri.
L’effetto che si viene a creare è abbastanza veritiero…

Lascia un commento

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *